Maury Home Page

 

 





Instructions: Use the Site Map (Mid Left) to navigate your way through our Paint Sprayer Pages. At any time click on the Maury Logo (Upper Right) to go back to our home page.

 Graco

HVLP 

Electric Airless 

Ultra Max Airless 

Gas Airless 

Air-Powered Airless 

Titan / Speeflo

HVLP 

Epic Series 

Elite Series 

Air-Powered Airless 

PowrTwin Airless 

Line Stripers 

SprayTECH

HVLP 

Electric Airless 

Gas Airless 

Spray Tip Chart 

 

Hero

Elite Series - Gas Airless Piston - page 1

Service Made Easy

   Making a great pump doesn't stop with performance. Thanks to their modular construction, Titan's Elite Series spray pumps are also very easy to service.

    The fluid section can be removed for service in minutes, in the field or in the shop. The inlet and outlet valves are easily accessible for cleaning.

   Even the clutch on the G55 or G40 is easy to access and service. The heavy duty 12 tooth spline clutch with a patented auto-gap system assures smooth and efficient operation, unlike other types of systems.

    The clutch rotor and coil have been located in an aluminum housing away from the high engine temperatures for long life and accessible service.


Drive Train Gearing

   Extra Large drive train gears extend life of pump. Backed by a lifetime warranty

Clutch Rotor/Coil Location

   Heavy Duty 12 tooth spline clutch with a patented auto-gap system assures smooth, efficient operation.

   The clutch rotor and coil have been located in an aluminum housing away from the high engine temperatures for longer life and accessible service

Fluid Section/Packings

   Patented unitized packings never need adjusting and last up to 50% longer than the competition. Reversible seats and modular design make it easy to service.

Availability:

Discontinued

  • Max. Pressure : 0-3000 psi (210 bar)
  • Gun Capacity/Tip Sizes : one gun .031, two guns .021
  • Weight : 115 lbs. (52 Kg)
  • Delivery : 1 gpm (3.8 lpm)
  • Cycle Rate : 100 per gallon (26.5 lpm)
  • Power Source : 4.0 HP Honda Engine
  • Filter Manifold : 60 mesh, 20 square inch., stainless steel

Availability:

Discontinued

  • Max. Pressure : 0-3000 psi (210 bar)
  • Gun Capacity/Tip Sizes : one gun .035, two guns .025, three guns .019
  • Weight : 125 lbs. (56.7 Kg)
  • Delivery : 1.35 gpm (5.1 lpm)
  • Cycle Rate : 100 per gallon (26.5 lpm)
  • Power Source : 5.5 HP Honda Engine
  • Filter Manifold : 60 mesh, 20 square inch., stainless steel

Next

     

Copyright 1997 Maury Enterprises, Inc., All Rights Reserved